HP 6125G HP 6125G & 6125G/XG Blade Switches Fundamentals Configuration - Page 70
NMS login example, Network requirements, Configuration procedure
View all HP 6125G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
NMS login example Network requirements Configure the device and the NMS so you can remotely manage the device through SNMPv3. Figure 31 Network diagram Configuration procedure 1. Configure the device: # Assign an IP address to the device. Make sure the device and the NMS can reach each other. (Details not shown.) # Enter system view. system-view # Enable the SNMP agent. [Sysname] snmp-agent # Configure an SNMP group. [Sysname] snmp-agent group v3 managev3group # Add a user to the SNMP group. [Sysname] snmp-agent usm-user v3 managev3user managev3group 2. Configure the NMS. Details are not shown. For more information, see the NMS manual. Make sure the NMS has the same SNMP settings. Otherwise, the device cannot be discovered or managed by the NMS. 64