HP 6125G HP 6125G & 6125G/XG Blade Switches Fundamentals Configuration - Page 44
By default, a screen displays 24, Enter system view.
View all HP 6125G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
Step 1. Enter system view. 2. Enable copyright information display. 3. Enter one or multiple VTY user interface views. Command system-view copyright-info enable user-interface vty first-number [ last-number ] Remarks N/A By default, copyright information display is enabled. N/A 4. Enable the terminal service. shell Optional. By default, terminal service is enabled. 5. Enable the user interfaces to support Telnet, SSH, or both of them. protocol inbound { all | ssh | telnet } Optional. By default, both Telnet and SSH are supported. The configuration takes effect the next time you log in. 6. Define a shortcut key for terminating tasks. escape-key { default | character } Optional. By default, press Ctrl+C to terminate a task. 7. Configure the type of terminal display. terminal type { ansi | vt100 } Optional. By default, the terminal display type is ANSI. 8. Set the maximum number of lines to be displayed on a screen. screen-length screen-length Optional. By default, a screen displays 24 lines. A value of 0 disables the function. 9. Set the size of command history history-command max-size buffer. value Optional. By default, the buffer saves 10 history commands. 10. Set the idle-timeout timer. idle-timeout minutes [ seconds ] Optional. The default idle-timeout is 10 minutes for all user interfaces. The system automatically terminates the user's connection if there is no information interaction between the device and the user within the timeout time. Setting idle-timeout to 0 disables the timer. 38