HP Designjet 4000 Service Manual - Page 120

Service Tests and Utilities PHONE SUPPORT 12. Set Unit Configuration The purpose of this test is to automatically configure the Printer either as Standard or Productivity. Set the Unit Configuration as follows: 1 In the Service Tests submenu, scroll to "12. Set Unit Configuration" and press Enter. Press Enter 2 The Printer will start the configuration process and the Front Panel will display the following messages: „ Starting Nvm. „ Getting Part Number: (will show either Q1273A/Q1274A or Q1271A/ Q1272A). If there is a failure at this point, the Front Panel will display System Error Code 79:03. For more information on troubleshooting this error code, refer to Page 2-21. 3 The following message will be displayed on the Front Panel. Press any key to finish the configuration. If there is a failure at this point, the Front Panel will display System Error Code 79:03. For more information on troubleshooting this error code, refer to Page 2-21. 4 Once the process is completed, OK will be displayed on the Front Panel. 4-46 hp designjet 4000 series printer service manual