HP LaserJet Pro CM1415 HP LaserJet Pro CM1410 - Software Technical Reference - Page 107
Print on Both Sides Manually, Allow Manual Duplexing, Device Settings, Properties, Not Installed
View all HP LaserJet Pro CM1415 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 107 highlights
appears prompting you to configure the driver settings for manual printing on both sides. Manual printing on both sides does not occur automatically. Select the paper type that corresponds to the paper that you are using for the print job. The following paper types have a different print modes when you manually print on the second side: ● Plain ● Preprinted ● Letterhead ● Prepunched ● Bond ● Recycled ● Colored ● Rough NOTE: To make the Print on Both Sides (Manually) check box available in the document options, select the Allow Manual Duplexing option on the Device Settings tab in the print-driver Properties tab set. See Installable Options on page 100. If you want to print on both sides manually while using paper that is supported for automatic duplexing, you must select and apply the Not Installed setting on the Allow manual duplexing option on the Device Settings tab. Cardstock paper can be manually printed on the second side, but no change occurs to the print mode. Transparencies and labels should never be manually printed on the second side. To print a multiple-page document, follow these steps: 1. Select the Print on Both Sides (Manually) check box. 2. Click OK. The even-number pages of the document print. 3. When the control panel shows the Manually Feed message, insert the stack of paper (on which the even-number pages have been printed) as indicated in the following figure. ENWW Finishing tab features 87