HP LaserJet Pro CM1415 HP LaserJet Pro CM1410 - Software Technical Reference - Page 162

Service menu In the following table, items that have an asterisk (*) indicate the factory default setting. Menu item Fax Service Sub-menu item Clear Saved Faxes Run Fax Test Sub-menu item Print T.30 Trace Error Correction Fax Service Log Cleaning Page Now Never* If Error At End of Call On* Off USB Speed High* Full Description Clears all faxes in memory. Performs a fax test to verify that the phone cord is plugged in the correct outlet and that there is a signal on the phone line. A fax test report is printed indicating the results. Prints or schedules a report that is used to troubleshoot fax transmission issues. The error correction mode allows the sending device to re-transmit data if it detects an error signal. The fax service log prints out the last 40 entries in the fax log. Cleans the product when specks or other marks appear on printed output. The cleaning process removes dust and excess toner from the paper path. When selected, the product prompts you to load plain Letter or A4 paper in Tray 1. Touch the OK button to begin the cleaning process. Wait until the process completes. Discard the page that prints. Sets the USB speed for the USB connection to the computer. For the product to actually operate at high speed, it must have high speed enabled and be connected to an EHCI host controller that is also operating at high speed. This menu item also does not reflect the current operating speed of the product. 142 Chapter 6 Solve problems ENWW