HP LaserJet Pro CM1415 HP LaserJet Pro CM1410 - Software Technical Reference - Page 179

Fax Send error. Description An error occurred while trying to send a fax. Recommended action Try resending the fax. Try faxing to another fax number. Check that the telephone cord is securely connected by unplugging and replugging the cord. Make sure that you are using the telephone cord that came with the product. Open the Service menu, and touch the Fax Service button. Touch the Run Fax Test button. This test verifies that the phone cord is connected to the correct port and that the phone line has a signal. The product prints a report with the results. Connect the product to a different phone line. Set the fax resolution to Standard instead of the default of Fine. Fax storage is full. Canceling the fax receive. Description The amount of available memory for storing faxes is insufficient to store an incoming fax. Recommended action If you are using the Private Receive feature, print all received faxes to regain some memory. If you still need more memory, clear faxes from memory. Open the Service menu. In the Fax Service menu, select the Clear Saved Faxes option. Fax storage is full. Canceling the fax send. Description During the fax job, the memory filled. All pages of the fax have to be in memory for a fax job to work correctly. Only the pages that fit into memory were sent. Recommended action Cancel the current job. Turn the product off, and then turn it on again. Try sending the job again. If the error reoccurs, cancel the job and turn the product off and then on a second time. The product might not have enough memory for some jobs. Fit to Page on flatbed only Description The copy reduce/enlarge feature (called "Fit to Page") applies only to copies made from the flatbed scanner. ENWW Tools for troubleshooting 159