HP LaserJet Pro CM1415 HP LaserJet Pro CM1410 - Software Technical Reference - Page 252

Sender receives a busy signal A handset is connected to the product ● Make sure the phone is hung up. ● Change the Answer Mode option to match the product setup. a. From the Home screen, touch the Setup button. b. Open the Fax Setup menu. c. Open the Basic Setup menu. d. Open the Answer Mode menu. e. Select the setting that matches the product setup. Set the Answer Mode option to the Fax/Tel setting to automatically receive faxes. The Fax/ Tel setting automatically detects whether the incoming transmission is a fax or a voice call and routes the call to the appropriate device. A phone line splitter is being used ● If you are using a phone line splitter, remove the splitter and set up the phone as a downstream phone. ● Make sure the phone is hung up. ● Make sure the phone is not being used for a voice call when faxing. No dial tone ● If using a phone line splitter, remove the phone line splitter and set up the phone as a downstream phone. Cannot send or receive a fax on a PBX line ● If you are using a PBX phone line, contact your PBX administrator to configure an analog fax line for your product. 232 Chapter 6 Solve problems ENWW