HP StorageWorks 1606 Brocade Fabric Watch Administrator's Guide v6.3.0 (53-100 - Page 70

6 Threshold configuration Threshold boundary level is setat : Default DefaultCustom Unit Percentage(%) Time base minuteminute Low 0 0 High 100 100 BufSize 0 0 Percentage(%) Threshold alarmlevel is set at: Default Errlog-1, SnmpTrap-2, PortLogLock-4 RapiTrap-8, EmailAlert-16, PortFencing-32 Valid alarm matrix is 63 DefaultCustom Changed 0 0 Below 0 0 Above 0 0 InBetween 0 0 1 : change behavior type 11 : change threshold alarm level 2 : change behavior interval 12 : change changed alarm 3 : change threshold boundary level 13 : change belowalarm 4 : change custom unit 14 : change abovealarm 5 : change custom timebase 15 : change inBetween alarm 6 : change custom low 16 : apply threshold alarm changes 7 : change custom high 17 : cancel threshold alarm changes 8 : change custom buffer 18 : return to previous page 9 : apply threshold boundary changes 10 : cancel threshold boundary changes Select choice => : (1..18) [18]7 where: Index ThresholdName BehaviorType BehaviorInt A numeric identifier assigned to the element A string identifier assigned to the element Frequency of alarm notifications The element behavior interval, in seconds 2. Refer to the following system output to customize high threshold boundary for RXPerformance. The threshold boundary section of the Advanced Configuration menu includes the threshold information for the selected area. It contains two columns, Default (the default settings column) and Custom (the custom settings column), and indicates the current setting. NOTE Default threshold boundary settings are Fabric OS default settings; custom settings are user-defined. 46 Fabric Watch Administrator's Guide 53-1001342-01