HP StorageWorks 1606 Brocade Fabric Watch Administrator's Guide v6.3.0 (53-100 - Page 79
E-mail notification configuration, Configuring e-mail notifications in a Telnet session
View all HP StorageWorks 1606 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
Fabric Watch notification 6 DefaultCustom Unit Percentage(%) Time base minuteminute Low 0 0 High 100 80 BufSize 0 0 Percentage(%) Threshold alarmlevel is set at: Custom . . . 3. Type 16 at the Select choice => prompt to apply the threshold alarm level changes. Unless you apply the value, it does not take effect. 1 : change behavior type 11 : change threshold alarm level 2 : change behavior interval 12 : change changed alarm 3 : change threshold boundary level 13 : change belowalarm 4 : change custom unit 14 : change abovealarm 5 : change custom timebase 15 : change inBetween alarm 6 : change custom low 16 : apply threshold alarm changes 7 : change custom high 17 : cancel threshold alarm changes 8 : change custom buffer 18 : return to previous page 9 : apply threshold boundary changes 10 : cancel threshold boundary changes Select choice => : (1..18) [18]16 E-mail notification configuration In environments where it is critical that you are notified about errors quickly, you might want to use e-mail notifications. With e-mail notifications, you can be notified of serious errors by e-mail or a pager, so you can react quickly. Configuring e-mail notifications in a Telnet session To configure e-mail notifications in a Telnet session, enter the fwMailCfg command at the prompt. The fwMailcfg menu displays. 1 : Show Mail Configuration Information 2 : Disable Email Alert 3 : Enable Email Alert 4 : Send Test Mail 5 : Set Recipient Mail Address for Email Alert 6 : Relay Host IP Configuration 7 : Quit Select an item => : (1..7) [7] Fabric Watch Administrator's Guide 55 53-1001342-01