HP StorageWorks 8/80 Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 100

4 Uploading and downloading from USB storage • Local zone configuration • iSCSI config (if any) • All other config information except Admin Domain configuration information • If you invoke it from AD255 and you are logged in with any role that allows config upload/ download), the following will be saved in the configuration file: • Configuration information for zones in all Admin Domains • iSCSI configuration (if any) • All other configuration information, including zoning from all Admin Domains The filtering depends on the Admin Domain switch ownership, with additional access if you are in AD255. Access to the command itself is limited by Role-Based Access (RBAC), and not by whether the current user is a Physical Fabric Administrator or an admin user with enumerated access to the relevant domains. NOTE The ability to change Admin Domain context requires installing the EGM license. Refer to "Changing the Admin Domain context" on page 26 for complete instructions. The EGM license is required only for 8 Gbps platforms, such as the Brocade DCX and DCX-4S enterprise-class platforms, the Encryption Switch, the 300, 5300, and 5100 switches. For non-8 Gbps platforms, all functionalities are available without EGM license. Uploading and downloading from USB storage If you choose to upload or download from a USB device, you must left-click the USB port to launch the USB Port Management wizard (Figure 37). 1. Select Mount USB Device, and select Yes at the confirmation prompt. 2. Highlight the configuration files you want and click Copy to upload, or Export to download. 72 Web Tools Administrator's Guide 53-1001194-01