HP StorageWorks 8/80 Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 285

IPSec over management ports 17 Manually creating an SA You can manually create a security association (SA). 1. Select the SA(Manual) tab. 2. Select Add. The Add Manual-SA dialog box is displayed (Figure 131) FIGURE 131 Add Manual-SA dialog box 3. Type a security parameter index number in the SPI (Hexadecimal) field. The SPI must be manually applied when manually adding an SA. 4. Enter the IP address of the endpoint that sends the SA in the Source IP Address field. 5. Enter the IP address of the endpoint that receives the SA in the Peer IP Address field. 6. Select the protocol used to carry the transmission using the Protocol Name selector. 7. Select the Traffic Flow Direction (in or out). IPSec policies are unidirectional, and must be applied separately to inbound and outbound flows. - For the flow from peer to source, choose in. - For the flow from source to peer choose out. Web Tools Administrator's Guide 257 53-1001194-01