HP StorageWorks 8/80 Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 146

8 Performance Monitor overview Table 12 lists each graph and indicates the supported port types for each. The port selection lists for each graph display the supported ports for that graph. TABLE 12 Supported port types for Brocade switches Graph Type Physical FC_Ports Logical FC_Ports GbE Ports Port Throughput P P P Switch Aggregate N/A N/A N/A Throughput Blade Aggregate N/A N/A N/A Throughput1 Switch Throughput P P Utilization Port Error P P P Switch Percent Utilization P P Port Snapshot Error P P SID/DID Performance P P SCSI Commands P SCSI vs. IP Traffic P 1. Blade Aggregate Throughput graph is supported only on the Brocade 48000 and Brocade DCX and DCX-4S enterprise-class platforms. The labeling of axes in the graphs depends on the switch type. • For the Brocade 48000 and DCX and DCX-4S enterprise-class platforms, slot numbers are displayed with expansion arrows next to them, as shown in Figure 61 on page 121. Click the arrows to expand and contract the list of ports per slot. • Switches such as the Brocade 200E, 300 4012, 4016, 4018, 4020, 4024, 4100, 4900, 5000, 5100, 5300, 7600, the 7500 and 7500E Extension switches, and the Brocade Encryption Switch do not have slot numbers because they have no blade FRUs, and therefore there is no need for slot numbering. • For Brocade 48000 and Brocade DCX and DCX-4S enterprise-class platforms, the X-axis scales up to 409.6 Gbps in multiples of 2. • For Brocade 200E, 300, 4012, 4016, 4018, 4020, 4024, 4100, 4900, 5000, 5100, 5300, 7600, the 7500 and 7500E Extension switches, and the Brocade Encryption Switch, the X-axis scales up to 8.0 Gbps in increments of 0.8 Gbps. Port throughput utilization is represented by a horizontal bar for each selected port, which gets longer or shorter depending on the percent utilization for that port at the last poll time. Thin short vertical intersecting bars give a historical perspective by representing the highest and lowest values reached for each selected port since the graph was opened. A third bar between them represents the average of all values polled (see Figure 61). NOTE Virtual ports on logical switches cannot be graphed. 120 Web Tools Administrator's Guide 53-1001194-01