HP StorageWorks 8/80 Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 227

Setting up iSCSI Target Gateway Services 15 Configuring the IP route (optional) 1. Launch the iSCSI Target Gateway Admin module as described on page 194. 2. Select the iSCSI Port tab. 3. From the left pane, select the GbE port that to use. 4. Select the IP Routes tab. 5. Click Add. FIGURE 96 Add IP Route dialog box 6. Enter the IP address, subnet mask, and gateway IP address, and the metric. 7. Click Add. Editing the IP route 1. Open the iSCSI Target Gateway Admin as described on page 194. 2. Select the iSCSI Port tab. 3. From the left pane, select the GbE port that to use. 4. Select the IP Routes tab. 5. Click Edit. A warning dialog box appears. 6. Click OK. 7. Enter a new value for the metric. 8. Click OK. If you want to change a value other than the metric, you must delete this route and create another in its place. Web Tools Administrator's Guide 199 53-1001194-01