HP StorageWorks 8/80 Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 160
Zoning management
View all HP StorageWorks 8/80 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 160 highlights
9 Zoning management 1. Open the Zone Administration window (see "Opening the Zone Administration window" on page 133). 2. Click Zoning Actions > Set Default Mode, and then select the access mode. Zoning management You can monitor and manage basic and traffic isolation zoning through the Web Tools Zone Administration. The information in the Zone Administration window is collected from the selected switch. If the FCS policy is activated in the fabric, zoning can be administered only from the primary FCS switch. If the selected switch has an Advanced Zoning license installed, but is not the primary FCS switch, the Zone Admin option is displayed, but not activated. You must be logged into the switch using a user name with one of the following roles associated with it to make changes to the zoning: zoneAdmin, admin, or fabricAdmin. All other roles allow only a view or read-only access. Most of the zoning operations are disabled in read-only mode. A snapshot is taken of all the zoning configurations at the time you launch the Zone Administration window; this information is not updated automatically by Web Tools. To update this information, see "Refreshing Zone Administration window information" on page 135. When you log in to a virtual switch, or select a virtual switch from the Switch Administration window, only the ports that are associated with the Virtual Fabric ID you selected are displayed in the member selection list. You can use the Add Other button to add ports of other switches in the fabric. FIGURE 67 Zone Administration window 134 Web Tools Administrator's Guide 53-1001194-01