HP StorageWorks 8/80 Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 162

9 Zoning management Refreshing fabric information This function refreshes the display of fabric elements only (switches, ports, and devices). It does not affect any zoning element changes or update zone information in the Zone Administration window. You can refresh the fabric element information displayed at any time. 1. In the Zone Administration window, click View > Refresh From Live Fabric. This refreshes the status for the fabric, including switches, ports, and devices. NOTE Depending on the role associated with your user name or if the switch is owned by the current Admin Domain you are logged in to, you may not be able to modify zones or ports in other Admin Domains. Refreshing Zone Administration window information The information displayed in the Zone Administration window is initially a snapshot of the contents of the fabric zoning database at the time the window is launched. Any changes you make to this window are saved to a local buffer; but they are not applied to the fabric zoning database until you invoke one of the transactional operations listed in the Zoning Actions menu. Any local zoning changes are buffered by the Zone Administration window until explicitly saved to the fabric. If the fabric zoning database is independently changed by another user or from another interface (for example, the CLI) while Web Tools zoning changes are still pending, the refresh icon starts to blink (after a 15-30 second polling delay). You can then choose to refresh the current Web Tools zoning view to reflect the new, externally changed contents of the fabric zoning database, in which case any pending local changes are lost, or you can ignore the blinking refresh icon and save your local changes, overwriting the external changes that triggered the icon to blink. You can refresh zoning to back out current, unsaved work and start over. You can refresh the zoning information at any time, either using the refresh icon (whether it is flashing or not) or from the View menu. The following procedure updates the information in the Zone Administration window with the information saved in the zoning database on the switch. ATTENTION When you refresh the buffered information in the Zone Administration window, any zoning configuration changes you made and not yet saved are erased from the buffer and replaced with the currently enabled zone configuration information that is saved on the switch. 1. Launch the Zone Administration window as described on page 133. 2. Click View > Refresh Zoning or click Refresh. This re-displays the information in the Zone Administration window with the information in the switch's zoning database. This action also refreshes the fabric information as described in "Refreshing fabric information" on page 135. Any unsaved zoning changes are deleted. 136 Web Tools Administrator's Guide 53-1001194-01