HP StorageWorks 8/80 Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 201

Access Gateway policy modification 12 FIGURE 85 F-N Port Mapping Configuration dialog box 4. In the Primary Mappings area, select ports and use the Add button to map F_Ports or U_Ports to N_Ports. Use the Remove button to delete an F_Port mapping from an N_Port. 5. Define a Secondary N_Port in the Secondary Failover Mappings area, by selecting the ports using the Add and Remove buttons to set up the secondary mappings. The F_Port will fail over to the Secondary N_Port if the primary mapped N_Port is offline. This step is optional. You do not have to define a secondary failover mapping for each F_Port. The secondary mappings must be to a different N_Port in the same group as the primary mapping. If a Secondary N_Port is not defined, the F_Port failover is to any online N_Port. 6. After you have made the appropriate changes, click Save. Access Gateway policy modification Although you can control a number of policies on switches in Access Gateway mode, Web Tools only provides the ability to enable and disable the policies. For more information on these policies please refer to Access Gateway Administrator's Guide. Web Tools Administrator's Guide 175 53-1001194-01