HP Superdome SX2000 User Service Guide, Seventh Edition - HP Integrity Superdo - Page 56
Acoustic Noise Specification, Airflow
View all HP Superdome SX2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
Table 2-16 HP Integrity Superdome/sx2000 Single-Core CPU Configurations (continued) Cell (in cabinet) Memory (DIMMs I/O (fully per Cell) populated) Typical Power (Watts) Cooling (BTU/Hr) Breaker Power (Watts)2 8 8 2 6823 23302 8596 8 4 4 7260 24794 9147 8 4 2 6300 21516 7938 6 16 4 6968 23797 8779 6 16 2 6008 20518 7570 6 8 4 6640 22677 8366 6 8 2 5680 19398 7156 6 4 4 6325 21601 7969 6 4 2 5365 18322 6759 4 16 4 5813 19852 7324 4 16 2 4853 16574 6114 4 8 4 4647 15870 5855 4 8 2 3687 12592 4645 4 4 4 5382 18380 6781 4 4 2 4422 15102 5571 2 16 2 3656 12486 4606 2 8 2 3534 12069 4453 2 4 2 3423 11690 4313 1 Values in Table 2-15 are based on 25 W load I/O cards, 1 GB DIMMs and four Intel® Itanium ® single-core processors with 9 MB cache per cell board. 2 These numbers are valid only for the specific configurations shown. Any upgrades can require a change to the breaker size. A 5-wire source uses a 4-pole breaker, and a 4-wire source uses a 3-pole breaker. The protective earth (PE) ground wire is not switched. Acoustic Noise Specification The acoustic noise specifications are as follows: • 8.2 bel (sound power level) • 65.1 dBA (sound pressure level at operator position) These levels are appropriate for dedicated computer room environments, not office environments. You must understand the acoustic noise specifications relative to operator positions within the computer room when adding HP Integrity Superdome/sx2000 systems to computer rooms with existing noise sources. Airflow HP Integrity Superdome/sx2000 systems require the cabinet air intake temperature to be between 15οC and 32οC (59οF and 89.6οF) at 2900 CFM. Figure 2-2 illustrates the location of the inlet and outlet air ducts on a single cabinet. 56 System Specifications