Kyocera KM-1820 1820 Operation Guide (Advanced Edition) - Page 107
Advanced > E-mail > SMTP > General, SMTP Port Number
View all Kyocera KM-1820 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 107 highlights
Using COMMAND CENTER Advanced > E-mail > SMTP > General The printing system network component offers e-mail function. SMTP (Simple Mail Transfer Protocol) is an embedded protocol to support this function. To use the email function, the printing system needs connection to an e-mail server using the POP3 protocol. Item Description SMTP Protocol Enables or disables SMTP protocol. To use e-mail, this protocol must be enabled. SMTP Port Number Set the SMTP Port Number or use the SMTP default port 25. SMTP Server Name Enter the SMTP server name or its IP address. The maximum length of the SMTP server name and IP address is 62 characters. If entering the name, rather than the IP address, a DNS server address must also be configured. The DNS server address may be entered on the TCP/IP General tab (Advanced > Protocols > TCP/IP > General). SMTP Server Timeout Enter the time. Authentication Protocol Enables or disables the SMTP authentication protocol or sets POP before SMTP as the protocol. The SMTP authentication supports Microsoft Exchange 2000. Authenticate as Authentication can be set from three POP3 accounts or you can choose a different account. Login Account Name When Other is selected for Authenticate, the account name set here will be used for SMTP authentication. The maximum length of the login account name is 62 characters. Login Password When Other is selected for Authenticate, the password set here will be used for authentication. The maximum length of the login password is 62 characters. POP before SMTP Timeout Enter the time if you chose POP before SMTP as the Authentication Protocol. Test This will test one transmission for each press. E-mail Size Limit Enter the maximum size of e-mail that can be sent in Kilobytes. When the value is 0, the limitation for E-mail size is disabled. Sender Address Enter the e-mail address of the person responsible for the printing system, such as the printer administrator, so that a reply or non-delivery report will go to a person rather than to the machine. The sender address must be entered correctly for SMTP authentication. The maximum length of the sender address is 126 characters. Signature Enter the signature. The signature is free form text that will appear at the end of the e-mail body. It is often used for further identification of the machine. The maximum length of the signature is 126 characters. Domain Restrictions Enter the domain names that can be permitted or rejected. The maximum length of the domain name is 30 characters. You can also specify the e-mail addresses. 8-22 ADVANCED OPERATION GUIDE