Kyocera KM-1820 1820 Operation Guide (Advanced Edition) - Page 56
Adjusting Alarms, Available, Settings, Description, Reset/Power
View all Kyocera KM-1820 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
System Settings Adjusting Alarms The following shows the various alarms and the available volume settings. Item Available Settings Volume 0 Off 1 Minimum 2 3 Middle 4 5 Maximum Key Conf. Buzzer Off On Key Fail Buzzer Off On Reset Buzzer Off On Job End Buzzer Off On Ready Buzzer Off On Warning Buzzer Off On Description Adjust the volume of the alarms. To make all alarm sounds inaudible, select the Off setting. The larger the setting value, the larger the volume. Indicates that the machine has accepted the key operation that was performed by the user. Indicates that for some reason the machine is unable to accept the key operation that was performed by the user. Indicates that Reset/Power was pressed in order to reset the current settings. Indicates that a corresponding copy, print, or send job was completed or that the machine has returned to an operation-ready state. Indicates that the machine is in an operation-ready state. Indicates that in its current state the machine is unable to perform the corresponding job. This setting applies when one of the following messages appears on the display. Close Document Processor. Insert Cassette 1. KPDL error. Job is ended. Load Paper in Cassette1 (Cassette2, MP Tray, or Document Processor). Memory overflow. Part of the job end is printed. Place original and press Start key. Print overrun. This page isn't complete. Remove original from Document Processor. Send error. Toner low. ADVANCED OPERATION GUIDE 5-9