Kyocera KM-1820 1820 Operation Guide (Advanced Edition) - Page 94
Basic > Reset, Basic > Device Defaults, Basic > Address Book, Address Book Contacts, Contact, Submit
View all Kyocera KM-1820 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 94 highlights
Using COMMAND CENTER Basic > Reset This page allows you to restart the machine in order to make all settings in the machine valid. It is also possible to select to have all settings returned to their factory default values. Item Restart entire device Reset entire device to factory default Description When clicking the Restart button, the machine restarts. Always restart the machine after you have changed any settings for the Basic > Network Page or the Advanced Page. When clicking the Reset button, the machine returns to the factory default settings. Basic > Device Defaults This page allows you to change the language that is used in the display, as well as to turn the Auto Sleep Mode On or Off. Item Operation Panel Language Low Power Timer Sleep Timer Description You can select the language of the messages on the display by following the procedure given below. The following languages are available for selection in the drop down list: English, Français, Deutsch, Italiano, Nederlands, Español, Português, and the downloaded languages You can optionally download messages in other languages. Contact your dealer for information. Adjusts the low power time between 1 to 240 minutes. The default setting is 30 minutes. Adjusts the sleep time between 1 to 240 minutes.The default setting is On. To turn the sleep timer on or off: Click Advanced which is in the right side of the drop down list. Switches Sleep Mode On or Off. Click the Submit button. Basic > Address Book This page allows you to add, edit or delete Contacts or Groups. Adding a New Contact 1 Open the Address Book Contacts page. 2 Click Add Contact and enter the information for the contact. 3 Enter the information for the contact to be registered. You can specify a fax number even if the FAX System is not installed. 4 Click Submit. ADVANCED OPERATION GUIDE 8-9