Kyocera KM-1820 1820 Operation Guide (Advanced Edition) - Page 99

Using COMMAND CENTER FAX Page This section includes settings, such as FAX transmission and reception settings, that apply to the FAX function of the device. FAX > Defaults The table below provides a summary of the items displayed on the FAX Default Settings page. Item Local FAX Name Local FAX Number Local FAX ID FAX Line FAX Media Type Speaker Volume Monitor Volume Description Specifies your FAX system name. Specifies your FAX system number. Specifies your FAX system ID. Sets the type of phone line to correspond to the type of telephone service that you are using. Be sure that the type of phone line you select is correct because, if the setting is incorrect, dialing will be impossible. The choices are Tone (DPMF) or Pulse (10pps). Sets the media type for printing the received documents. Refer to Paper Specifications. Sets the volume of the internal speaker that allows you to listen to conditions on the telephone line when the On-Hook key was pressed. The choices are Off and levels 1, 2 or 3. Sets the volume of the internal speaker that allows you to listen to conditions on the telephone line when the On-Hook key was not pressed. The choices are Off and levels 1, 2 or 3. FAX > Transmit The table below provides a summary of the items displayed on the FAX transmission page. Item TTI TTI Position Description Selects On or Off whether to send the TTI (Transmit Terminal Identifier) information to other party. Selects the TTI position to be printed on the transmitted documents. 8-14 ADVANCED OPERATION GUIDE