Kyocera KM-2560 2560/3060 Operation Guide (Advanced Edition) - Page 190

System Menu Output Tray Select output tray respectively for copy jobs, print jobs from Custom Box, computers, and FAX RX data. The options are as follows. Output Tray Descriptions Top Tray Delivery on Top Tray of the machine. Finisher Tray* Delivery on Tray set to the optional document finisher or built-in finisher. Job Separator Delivery on the optional job separator. * Select [Face Up] (print surface up) or [Face Down] (print surface down) for paper orientation at output. NOTE: Optional job separator, and document finisher are required. FAX RX data output can be specified when the optional fax kit is installed. Use the procedure below to select the output tray. 1 Press the System Menu key. 2 Press [Common Settings] and then [Next] of Output Tray. 3 Press [Change] of Copy/Custom Box, Printer, or FAX Port 1 or FAX Port 2. NOTE: FAX Port 1 appears when the optional fax kit is installed. If you have 2 optional fax kits installed, Fax Port 2 appears. You can specify the output tray for the second kit (Dual FAX). 4 Select Output Tray. For [Finisher Tray], select [Face Up] (print surface up) or [Face Down] (print surface down) for paper orientation at output. Common Settings - Copy /Custom Box Select output tray for copy jobs. Top Tray Finisher Tray Output Face Face Up Face Down Status 5 Press [OK]. Cancel OK 10/10/2007 10:10 6-20 ADVANCED OPERATION GUIDE