Kyocera KM-2560 2560/3060 Operation Guide (Advanced Edition) - Page 85
-sided/2-sided Selection, Original, Binding
View all Kyocera KM-2560 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 85 highlights
Sending Functions 1-sided/2-sided Selection Select the type and binding of original depending on the original. The table below lists the binding directions for each original type. 2 Original Type Binding 1-sided Sheet Original 2-sided Sheet Original 1-sided 2-sided* - Binding Left/Right, Binding Top Open Book Original such as magazine and book Book Binding Left, Binding Right * Only when the optional document processor is used. NOTE: To scan colored 2-sided originals using the optional document processor, you need to add memory to the machine. Contact to your service representative. Use the procedure below to select the original type and binding direction when sending scanned originals. 1 Place the originals on the platen. 2 Press the Send key. 3 Press [Type of Original/Transmission] and then [2-sided/Book Original] 4 Press [1-sided], [2sided], or [Book]. Ready to send. Place original . 2-sided/Book Original 1-sided Press [OK] to display the image. 2-sided Book Binding Left Right Destination 1 Status Add Shortcut Cancel Top Edge Top Original Orientation OK 10/10/2007 10:10 5 If you selected [2-sided] or [Book], you should also select the binding direction and press [Original Orientation] to select the direction in which the original is set on the platen. 6 Press [OK]. 7 Specify the destination, and press the Start key to start sending. ADVANCED OPERATION GUIDE 2-11