Kyocera KM-2560 2560/3060 Operation Guide (Advanced Edition) - Page 71
Program (Copying and Sending), Registering Programs
View all Kyocera KM-2560 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 71 highlights
Copying Functions Program (Copying and Sending) 1 After registering sets of frequently used functions as a single program, you can simply press the program number as needed to recall those functions. You can also name the programs for easy identification when recalling. NOTE: Sending operation can be registered in the program as well. Up to 50 functions combining copying and sending can be registered in the program. If user login is enabled, you can only register functions by logging in with administrator privileges. Registering Programs Use the procedure below to register a program. The following procedure is an example of registering the copying function. 1 Press the Program key while the copy mode is accessed. 2 Press [Register] and press a number (01 to 50) for the program number. If entering Program screen from the Copy screen or Send screen, go to step 4. NOTE: If you select a program number already registered, the currently registered functions can be replaced with a new set of functions. 3 Check that [Copy] is selected, and press [Next]. 4 Enter the new program name and press [Register] to register the program. Recalling Programs Use the procedure below to recall a registered program. 1 Press the Program key. 2 Press [Call] and press the key Program corresponding to the program number (01 01 06 to 50) to recall. 02 07 Press [No.] to enter 03 08 the program number directly for recalling. 04 09 05 10 Call Register Edit Status No. 10/10/2007 10:10 ADVANCED OPERATION GUIDE 1-57