Kyocera KM-2560 2560/3060 Operation Guide (Advanced Edition) - Page 70
Outputting Repeat Copy Jobs, Maximum Number of Repeat Copy Jobs Retained, Start, System Menu, Close
View all Kyocera KM-2560 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
Copying Functions 5 Place the originals in the document processor or on the platen. Press the Start key to start copying and register this job as a Repeat Copy job. Outputting Repeat Copy Jobs The Repeat Copy jobs are stored in the Document Box. Refer to Job Box on page 4-2 to print out the Repeat Copy jobs. Maximum Number of Repeat Copy Jobs Retained You can use the procedure below to change the maximum number of copy jobs that can be retained in the document box. Use the procedure below to change the maximum number of copy jobs retained. 1 Press the System Menu key. 2 Press [Document Box/Removable Memory] and then [Next] of Job Box. 3 Press [Change] of Repeat Copy Job Retention. 4 Use the [+] or [-] key to enter the maximum retention number. You can also enter the number from the number keypad. Document Box /Removable Memory - Repeat Copy Job Retention Set the maximum number of repeat copy jobs to retain. Use [-]/[+] or the numeric keys to enter a number. *Set this number to 0 to not retain any repeat copy jobs. (0 - 50) 1 job(s) A number between 0 and 50 can be Cancel entered as the Status number of retained jobs. OK 10/10/2007 10:10 NOTE: If you enter a value of 0 (zero), you cannot use the Repeat Copy function. 5 Press [OK]. 6 When exiting, press the Close key repeatedly to return to the System Menu default screen. 1-56 ADVANCED OPERATION GUIDE