Kyocera KM-2560 2560/3060 Operation Guide (Advanced Edition) - Page 76

Sending Functions Original Size Selection Select the size of originals that will serve as the basis for scanning. Be sure to select the original size when using originals of nonstandard sizes. Choose the original size from the following groups of original size. Item Detail Size Standard Sizes 1 Select from automatic detection and standard sizes. Inch models: Auto, Ledger, Legal, Letter, Letter-R, Statement, Statement-R, 8.5×13.5", Oficio II-R, 11×15" Metric models: Auto, A3, B4, A4, A4-R, B5, B5-R, A5, A5-R, B6, B6-R, A6-R, Folio Standard Sizes 2 Select from standard sizes except Standard Sizes 1 . Inch models: A3, B4, A4, A4-R, B5, B5-R, A5, A5-R, B6, B6-R, A6-R, Folio, 8K, 16 K, 16K-R Metric models: Ledger, Legal, Letter, Letter-R, Statement, Statement-R, 8.5×13.5", Oficio II-R, 11×15", 8K, 16K, 16K-R Others Select from Hagaki and Custom Original Size *. Hagaki, Oufuku Hagaki, Custom 1 to 4 Size Entry Enter the size that is not indicated in Standard Sizes 1 and 2**. Inch models Horizontal: 2 to 17" (in 0.01" increments), Vertical: 2 to 11.69" (in 0.01" increments) Metric models Horizontal: 50 to 432 mm (in 1 mm increments), Vertical: 50 to 297 mm (in 1 mm increments) * Regarding the setting method of Custom Original Size (Custom 1 to 4), refer to Custom Original Size Setup on page 6-6. ** The input units can be changed in the System menu. Refer to Switching Unit of Measurement on page 6-17. Use the procedure below to select the original size when sending scanned images. 1 Place the originals on the platen. 2 Press the Send key. 3 Press [Type of Original/Transmission] and then [Original Size]. 2-2 ADVANCED OPERATION GUIDE