Kyocera KM-2560 2560/3060 Operation Guide (Advanced Edition) - Page 191
Function Defaults, Reset, System Menu
View all Kyocera KM-2560 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 191 highlights
System Menu Function Defaults Defaults are the values automatically set after the warm-up is completed or the Reset key is pressed. Set the defaults for available settings such as copying and sending. Setting the frequently-used values as defaults makes subsequent jobs easier. Original Orientation Set the original orientation defaults. The available default settings are shown below. Item Top Edge Top Top Edge Left Description Select the original's top edge at the top. Select the original's top edge at the left. 6 Refer to page 1-11 for Original Orientation. Use the procedure below to select the default orientation when originals are placed on the platen. 1 Press the System Menu key. 2 Press [Common Settings], [Next] of Function Defaults and then [Change] of Original Orientation. 3 Select [Top Edge Top] or [Top Edge Left] for the default. Common Settings - Original Orientation Select the default original orientation. Top Edge Top Top Edge Left Status 4 Press [OK]. Cancel OK 10/10/2007 10:10 Continuous Scan Set the continuous scan defaults. The available default settings are shown below. Item Off On Description Continuous scan not performed Continuous scan performed ADVANCED OPERATION GUIDE 6-21