Kyocera KM-2560 2560/3060 Operation Guide (Advanced Edition) - Page 69

Copying Functions Repeat Copy 1 Enable additional copies in the desired quantity as necessary after a copy job is completed. For confidential documents, you can set up a pass code for the use of Repeat Copy. In such a case, the correct pass code must be entered when using Repeat Copy or copies will not be delivered. IMPORTANT: A Repeat Copy job is cleared when the main power switch is turned off. Repeat Copy is not available when the machine is equipped with the optional Security Kit. Repeat Copy cannot be used when the maximum number of Repeat Copy jobs to retain in the document box is set to zero (refer to Maximum Number of Repeat Copy Jobs Retained on page 1-56). You can select Repeat Copy as default setting. Refer to Repeat Copying on page 6-35. Giving a file name to a copy job will facilitate identification of the data when copying (refer to File Name on page 1-53). Selecting Repeat Copy Use the procedure below to select repeat copying. 1 Press the Copy key. 2 Press [Advanced Setup] and then [Repeat Copy]. 3 Press [On]. To register a password, press [# Keys] and enter a 4digit password. Ready to copy. Repeat Copy Off Press [OK] to display On the image. Copies 1 Password(4 digits) # Keys Status Add Shortcut Cancel OK 10/10/2007 10:10 IMPORTANT: If you forget the pass code, Repeat Copy will be unavailable. Make a note of the pass code beforehand if necessary. 4 Press [OK]. ADVANCED OPERATION GUIDE 1-55