Kyocera KM-2560 2560/3060 Operation Guide (Advanced Edition) - Page 236
Drum Refresh, CAUTION
View all Kyocera KM-2560 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 236 highlights
System Menu Drum Refresh Refresh the drum when image blur or white spots appear on images in copies. There are 2 drum refresh modes. Item Drum Refresh 1 Drum Refresh 2 Description Use this mode when images are blurred or smeared. Refreshing takes about 120 seconds. Use this mode when white spots appear on images. Refreshing takes about 160 seconds. CAUTION: Drum Refresh cannot be performed while printing. Execute Drum Refresh after the printing is done. To use [Drum Refresh 2], load 11 × 17" or A3 size paper into the Multi Purpose tray. When you run [Drum Refresh 2], the machine makes a vibrating sound for about 90 seconds until drum refreshing is completed. The toner soiling on the ejected paper is normal and does not indicate a fault. Use the procedure below to refresh the drum. 1 Place 11 × 17" or A3 on Multi Purpose tray. 2 Press the System Menu key. 3 Press [T], [Adjustment/Maintenance]. 4 Press [Execute] of Drum Refresh 1 or Drum Refresh 2. 5 Press [Yes] to feed paper to Multi Purpose Tray and start Drum Refresh. Adjustment/Maintenance Drum Refresh 1: Execute Drum Refresh 2: Auto Drum Refresh: Standard Change Main Charger Cleaning : Drum Refresh will be started. Are you sure? Execute Execute Status Yes No 2/2 Return to Top Close 10/10/2007 10:10 6 Once Drum Refresh ends, return to the Adjustment/Maintenance screen. 6-66 ADVANCED OPERATION GUIDE