Kyocera TASKalfa 500ci 500ci/400ci/300ci/250ci Operation Guide Rev-1 - Page 186

Sending Functions Original Size Selection Select the size of originals that will serve as the basis for scanning. Be sure to select the original size when using originals of nonstandard sizes. Choose the original size from the following groups of original size. Item Detail Size Standard Sizes 1 Standard Sizes 2 Others Size Entry Select from automatic detection and standard sizes. Select from standard sizes except Standard Sizes 1 . Select from Hagaki and Custom Original Size *. Enter the size that is not indicated in Standard Sizes 1 and 2**. Inch models: Auto, Ledger, Legal, Letter, Letter-R, Statement, Statement-R, 8.5×13.5", Oficio II-R, 11×15" Metric models: Auto, A3, B4, A4, A4-R, B5, B5-R, A5, A5-R, B6, B6-R, A6-R, Folio Inch models: A3, B4, A4, A4-R, B5, B5-R, A5, A5-R, B6, B6-R, A6-R, Folio, 8K, 16 K, 16K-R Metric models: Ledger, Legal, Letter, Letter-R, Statement, Statement-R, 8.5×13.5", Oficio II-R, 11×15", 8K, 16K, 16K-R Hagaki, Oufuku Hagaki, Custom 1 to 4 Inch models Horizontal: 2 to 17" (in 0.01" increments), Vertical: 2 to 11.69" (in 0.01" increments) Metric models Horizontal: 50 to 432 mm (in 1 mm increments), Vertical: 50 to 297 mm (in 1 mm increments) * Regarding the setting method of Custom Original Size (Custom 1 to 4), refer to Custom Original Size Setup on page 8-5. ** The input units can be changed in the System menu. Refer to Switching Unit of Measurement on page 8-15. Use the procedure below to select the original size when sending scanned images. 1 Press the Send key. 2 Place the originals on the platen. 3 Press [Original/Sending Data Format] and then [Original Size]. 5-2 OPERATION GUIDE