Kyocera TASKalfa 500ci 500ci/400ci/300ci/250ci Operation Guide Rev-1 - Page 334
Interrupt Clear Timer, Auto Error Clear ON/OFF, System Menu
View all Kyocera TASKalfa 500ci manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 334 highlights
Default Setting (System Menu) Auto Error Clear ON/OFF Select whether to use Auto Error Clear or not. Use the procedure below to specify the auto error clear setting. 1 Press the System Menu key. 2 Press [ ], [Date/Timer] and then [Change] of Auto Error Clear. 3 Press [Off] or [On]. 4 Press [OK]. Error Clear Timer If you select [On] for Auto Error Clear, set the amount of time to wait before automatically clearing errors. Options are between 5 and 495 seconds (every five seconds). NOTE: If you select [Off] for Auto Error Clear, the time display does not appear. Use the procedure below to set the automatic error clear delay. 1 Press the System Menu key. 2 Press [ ], [Date/Timer], [ ] and then [Change] of Error Clear Timer. 3 Press [+] or [-] to enter the time until printing restarts. You cannot use the number keypad to enter this value. 4 Press [OK]. Interrupt Clear Timer Set the period after which the machine reverts to Normal mode when it has been set to Interrupt Copy mode and then left unused. Any period between 5 and 495 seconds (in five-second increments) can be set. The procedure for setting the interrupt clear timer is explained below. 1 Press the System Menu key. 2 Press [ ], [Date/Timer], [ ] and then [Change] of Interrupt Clear Timer. 3 Press [+] or [-] to enter the time for the interrupt clear timer. 4 Press [OK]. 8-70 OPERATION GUIDE