Kyocera TASKalfa 500ci 500ci/400ci/300ci/250ci Operation Guide Rev-1 - Page 357
NetWare Setup, Default Setting System Menu, OPERATION GUIDE, Network, SMTP E-mail
View all Kyocera TASKalfa 500ci manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 357 highlights
Default Setting (System Menu) Item Description Default Setting Restarting the System* IPP Select whether or not to Off Y communicate using IPP. When selecting [On], set the IPP default Port:631 Port Number. Use the IPP default port 631. IPP over SSL Select whether or not to use IPP Off Y over SSL. SSL must be set to [On] in SSL Setup on page 8-96. Raw Port Select whether or not to receive On Y documents using Raw Port. * Y: The machine must be restarted after the setting is changed. N: The machine does not need to be restarted after the setting is changed. Use the procedure below. The following procedure is an example for specifying the SMTP (E-mail TX) settings. 1 Press the System Menu key. 8 2 Press [System] and then [Next] of Network to display the network settings screen. 3 Display the item you want to set and press [Change] for that item. In this example, press [Change] of SMTP (E-mail TX). 4 Press [On] or [Off]. 5 Press [OK]. 6 After changing the setting, restart the system or turn the machine OFF and then ON again. For detailed information on restarting the system, refer to Restarting the System on page 8-88. NetWare Setup Select the NetWare network connection. After that, select frame types for NetWare network from Auto, Ethernet-II, 802.3, 802.2, or SNAP. The default settings are "On, Frame Type: Auto". Use the procedure below. 1 Press the System Menu key. 2 Press [System], [Next] of Network and then [Change] of NetWare. OPERATION GUIDE 8-93