Kyocera TASKalfa 500ci 500ci/400ci/300ci/250ci Operation Guide Rev-1 - Page 333
Auto Sleep, Auto Error Clear, Auto Sleep ON/OFF, System Menu, Sleep Timer
View all Kyocera TASKalfa 500ci manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 333 highlights
Default Setting (System Menu) Auto Sleep If no job runs for a certain period of time, automatically enter Sleep Mode. Refer to Sleep and Auto Sleep on page 3-5 for Sleep Mode. Auto Sleep ON/OFF Select whether to use Auto Sleep or not. NOTE: Time remaining before Auto Sleep can be modified as necessary. Use the procedure below to specify the auto sleep setting. 1 Press the System Menu key. 2 Press [ ], [Date/Timer] and then [Change] of Auto Sleep. 3 Press [Off] or [On]. 4 Press [OK]. Sleep Timer 8 If you select [On] for Auto Sleep, set the amount of time to wait before Auto Sleep. Options are between 1 and 240 minutes (every one minute). NOTE: If you select [Off] for Auto Sleep, the time display does not appear. Use the procedure below to set the Auto Sleep time. 1 Press the System Menu key. 2 Press [ ], [Date/Timer] and then [Change] of Sleep Timer. 3 Press [+] and [-] or the numeric keys to enter the time until Auto Sleep is turned on. 4 Press [OK]. Auto Error Clear If an error occurs during printing, the print job stops to wait for the next step to be taken by the user. In the Auto Error Clear mode, automatically clear the error after a set amount of time elapses. The following errors are automatically cleared. Print overrun Memory is full OPERATION GUIDE 8-69