Kyocera TASKalfa 500ci 500ci/400ci/300ci/250ci Operation Guide Rev-1 - Page 415

Management User Login/Job Accounting - User Login User login administration. Select authentication method. Off Local Authentication Network Authentication Expansion Authentication Host Name Domain Name Server Type NTLM Kerberos # Keys 5 Select [Local Authentication] or [Network Authentication]. Select [Off] to disable user login administration. If you select [Network Authentication], enter the host name (62 characters or less) and domain name (256 characters or less) for the Authentication Server. Select [NTLM] or [Kerberos] as the server type. Cancel OK Status 10/10/2008 10:10 NOTE: If the login user name and password are rejected, check the following settings. • Network Authentication setting of the machine • User property of the Authentication Server • Date and time setting of the machine and the Authentication Server If you cannot login because of the setting of the machine, login with any administrator registered in the local user list and correct the settings. If the server type is [Kerberos], only domain names entered in uppercase will be recognized. 6 Press [OK]. Login/Logout Once you enable user login administration, a login user name and password entry screen appears each time you use this machine. Login Use the procedure below to login. Enter login user name and password. Login to: Login User Name Local abcdef Login Password ******** Check Counter Status # Keys # Keys Cancel IC Card Login Login 10/10/2008 10:10 1 If the screen below appears during the operations, press [Login User Name]. Press [# Keys] to enter the login data using the numeric keys. 2 Enter the login user name and press [OK]. 11 NOTE: Refer to the Character Entry Method on Appendix-7 for details on entering characters. OPERATION GUIDE 11-3