Kyocera TASKalfa 500ci 500ci/400ci/300ci/250ci Operation Guide Rev-1 - Page 416

Management 3 Press [Login Password]. Press [# keys] to enter the login data using the numeric keys. 4 Enter the login password and press [OK]. NOTE: If Job Accounting is enabled, you can browse the number of pages printed and the number of pages scanned by pressing [Counter Check]. If Network Authentication is selected as the user authentication method, either Local or Network can be selected as the authentication destination. 5 Check the login user name and password are correct, and press [Login]. Logout To log out the machine, press the Logout key to return to the login user name/login password entry screen. Auto Logout Logout is automatically executed in the following cases: • When the Power key is pressed to enter the sleep mode • When auto sleep is activated • When auto panel reset is activated • When auto low power mode is activated • When low power mode is activated by pressing the Energy Saver key. Adding a User This adds a new user. You can add Up to 1,000 users (including the default login user name). The table below explains the user information to be registered. Item User Name* Login User Name* Login Password* Access Level* Description Enter the name displayed on the user list (up to 32 characters). Enter the login user name to login (up to 64 characters). The same login user name cannot be registered. Enter the password to login (up to 64 characters). Select Administrator or User for user access privileges. 11-4 OPERATION GUIDE