Kyocera TASKalfa 500ci 500ci/400ci/300ci/250ci Operation Guide Rev-1 - Page 80

Basic Operation Selecting Color Mode When you scan and then copy, send or store documents, you can select the color mode used for scanning from the operation panel. Automatically recognizes whether scanned documents are color or black & white. Scans all documents in full color. Scans all documents in black & white. The basic procedure for selecting the color mode is explained below, using an example in which the scanned document is copied. 1 Press the Copy key. 2 Place the originals in the document processor or on the platen. 3 Press the Auto Color key, Full Color key or Black & White key to select the color mode. 4 Specify the required settings for copying. 5 Press the Start key. NOTE: You can fine tune the color mode from the touch panel. • Copying: You can use Single Color copying in Cyan, Green, etc. (page 4-15). • Sending/Storing: You can select Auto Color (Color/ Gray), Auto Color (Color/B & W) or Grayscale (page 5-24). You can also change the default color mode for copying and sending/storing. For details, refer to Color Selection (Copy) on page 8-22 or Color Selection (Send/ Store) on page 8-22. 3-8 OPERATION GUIDE