Samsung SPH-D700 User Manual (user Manual) (ver.f6) (English) - Page 192
To turn Wi-Fi off, To connect to a Wi-Fi network, To manually scan for a Wi-Fi network, Wi-Fi network.
View all Samsung SPH-D700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 192 highlights
To turn Wi-Fi off: 1. Press > and tap > Wireless & networks > Wi-Fi. 2. Tap to remove the green checkmark and deactivate Wi-Fi. - or - 1. Touch and hold the Status bar, and then slide your finger down the screen. 2. Tap the onscreen Wi-Fi icon to turn off the Wi-Fi service (turns gray when disabled). Note: Use of wireless data connections such as Wi-Fi and Bluetooth can cause an added drain to your battery and reduce your use times. To connect to a Wi-Fi network: 1. Press > and tap > Wireless & networks > Wi-Fi settings. Ⅲ The network names and security settings (Open network or Secured with xxx) of detected Wi-Fi networks are displayed in the Wi-Fi networks section. Note: When you select an open network, you will be automatically connected to the network. 2. To manually add your new network connection: Ⅲ Touch Add Wi-Fi network. Ⅲ Enter the Network SSID. This is the name of your Wi-Fi network. Ⅲ Tap the Security field and select a security option. This must match the current security setting on your target network. Ⅲ If secured, you will also need to enter the wireless password. The show password option, reveals the password as you type it instead of showing only asterisks (****). Ⅲ Tap Save to store the new information and connect to the Wi-Fi network. Note: The next time your device connects to a previously accessed or secured wireless network, you are not prompted to enter the wireless password again, unless you reset your device back to its factory default settings. To manually scan for a Wi-Fi network: 1. Press > and tap > Wireless & networks > Wi-Fi settings. 178 3B. Web and Data Services