Brother International MFC-7050C Service Manual - Page 119
message appears
View all Brother International MFC-7050C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 119 highlights
Messages on the LCD CLEAN UP SCANNER SCANNER ERROR BLACK NEAR EMPTY PHOTO NEAR EMPTY COLOR NEAR EMPTY BLACK INK EMPTY PHOTO INK EMPTY COLOR INK EMPTY SET CARTRIDGES PLS OPEN COVER PC BUSY OR FAIL Probable Cause In the scanning compensation data list printed by the maintenance-mode function code 05 (refer to Chap. V, Section 3.2), less than fifty percent of the white level data is faulty. (This message may appear only in the maintenance mode) In the scanning compensation data list printed by the maintenance-mode function code 05 (refer to Chap. V, Section 3.2), fifty percent or more of the white level data is faulty. (This message may appear only in the maintenance mode) The ink dot counter in the EEPROM on the main PCB has counted up the specified number of dots, meaning near empty of ink. Even if any of these messages is displayed, color printing is still possible. The ink dot counter in the EEPROM on the main PCB has counted up the specified number of dots, meaning that the ink has run out. Once any of these messages is displayed, color printing is no longer possible. (If black ink remains, printing of the received data record or monochrome copying is possible.) This message appears when the power is first applied to the equipment after initialization of the ink dot counter in the EEPROM on the main PCB, prompting the user to set ink cartridges. If this message appears, open and close the top cover. The message may disappear if opening/closing the top cover removes the error. After connected with the host computer, the equipment has received no response from the computer. (A communications error has occurred.) If only an alarm beep is heard without any message on the LCD when the equipment is powered up, the ROM or RAM will be defective. VI - 2