Brother International MFC-7050C Service Manual - Page 53
Brother International MFC-7050C Manual
View all Brother International MFC-7050C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
1.8 Auto Sheet Feeder (ASF) (1) Remove two screws "a" that secure the ASF to the frame chassis. (2) Remove screw "b" that secures the ASF to the paper feed motor bracket. (3) At the left end of the ASF (when viewed from the rear), press the latch inwards to unhook it from the square hole provided in the frame chassis, then lift up the ASF. Frame chassis Square hole Latch ASF Harness protection film Boss " d_" ASF Latch Lti Boss Paper feed motor bracket "a": Taptite, cup S M3x6 "b": Taptite, cup B M3x10 • Reassembling Notes • When reinstalling the ASF, fit the boss provided on the right end into the cutout of the paper feed motor bracket. • If you replace the ASF with a new one, attach a new harness protection film to the new ASF as illustrated below. Route the paper feed motor harness on the harness protection film. Harness protection film 0 to 1 0 mm 0 ASF IV - 21 0 to 1.0 mm