Brother International MFC-7050C Service Manual - Page 76
supporting
View all Brother International MFC-7050C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
Routing the carrier transport motor harness (and ink empty sensor harness) Carrier transport motor Adhesive tape Hook Opening (Do not let the carrier transport motor harness or ink empty sensor harness cross this opening. The ASF's latch will be fitted in this opening.) Carrier transport motor harness (Ink empty sensor harness) (Right) Hole provided in the frame chassis Taptite, bind S M3x5 " -- 4fer Do not loosen or remove these screws. Frame chassis (Front) (5) At the right end of the frame chassis, remove the main shaft holder and main shaft holder B. (See the illustration given on the next page.) (6) At the left end, remove the main shaft holder. (7) While supporting the left end of the main shaft, take up the right end and pull out the shaft to the right. (8) Remove the carrier's support from the top edge of the frame chassis and take out the carrier. IV - 44