Brother International MFC-7050C Service Manual - Page 58
Brother International MFC-7050C Manual
View all Brother International MFC-7050C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
1.12 Top Cover ASSY (1) Remove two screws. (2) Remove the adhesive tape that secures the panel-main harness and CIS harness to the upper cover. (3) Take off the top cover in the direction of the arrow. Taptite, bind B M4x12 eak, Top cover Hinge L Grounding wires CIS harness Panel-main harness Hinge R t. Scanner motor harness Upper cover (4) Place the top cover upside down. (5) Remove two screws from each of the hinges R and L, then take off those hinges. (See the illustration given on the next page.) The grounding wires, panel-main harness, and CIS harness also come off. (6) Cut off the binder that secures the scanner motor harness to the support provided on the top cover. IV - 26
1.12
Top
Cover
ASSY
(1)
Remove
two
screws.
(2)
Remove
the
adhesive
tape
that
secures
the
panel
-main
harness
and
CIS
harness
to
the
upper
cover.
(3)
Take
off
the
top
cover
in
the
direction
of
the
arrow.
Taptite,
bind
B
M4x12
eak,
Hinge
R
Top
cover
Hinge
L
CIS
harness
Panel
-main
harness
Grounding
wires
t.
Scanner
motor
harness
Upper
cover
(4)
Place
the
top
cover
upside
down.
(5)
Remove
two
screws
from
each
of
the
hinges
R
and
L,
then
take
off
those
hinges.
(See
the
illustration
given
on
the
next
page.)
The
grounding
wires,
panel
-main
harness,
and
CIS
harness
also
come
off.
(6)
Cut
off
the
binder
that
secures
the
scanner
motor
harness
to
the
support
provided
on
the
top
cover.
IV
-
26