Dell EqualLogic PS6210XS EqualLogic Host Integration Tools for Linux Version 1 - Page 39
rswcli --mpio-list Command Syntax, Example: Listing Included MPIO Subnets
View all Dell EqualLogic PS6210XS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
The mpio-parameters command succeeded. rswcli --mpio-list Command Syntax The command syntax is as follows: rswcli --mpio-list | -L [--include-only | -io or --exclude-only | --eo] The following table describes the optional command parameters. Table 13. List of Optional MPIO Parameters Parameter --include-only Abbr. --io --exclude-only --eo Description Specifies that the list should only contain the subnets that are included for use by MPIO. If this parameter is specified, the exclude-only parameter cannot be specified. Specifies that the list should only contain the subnets that are excluded from use by MPIO. If this parameter is specified, the include-only parameter cannot be specified. Example: Listing Included MPIO Subnets In the following example, the command syntax lists only included MPIO subnets: # rswcli --mpio-list --io Processing mpio-list command... Subnets included for MPIO: 192.x.x.xx - 225.xxx.x.x Subnets excluded from MPIO: none The mpio-list command succeeded. Including a Subnet or Adapter for MPIO Use the rswcli --mpio-include (or rswcli -I) command to select the subnets or adapters to include for MPIO. You can specify a subnet, an adapter identified by a user-defined string, an IP address, or a MAC address. Dell recommends using a subnet or adapter name based on inclusion/exclusion rules. rswcli --mpio-include Command Syntax rswcli --mpio-include | -I [--network ip-address | --net] [--mask subnet-mask ] [--adapter=adapter-name ] [--mac=mac-address ] [--ip-address=ip-address ] [--force] [--default=include/exclude ] The following table describes the optional command parameters. Table 14. Include MPIO Subnet Optional Parameters Parameter --network Abbr. --net Argument ip-address Description Specifies a subnet to include. Used with the --mask parameter. Configuring Multipath I/O Devices 39