Dell PowerConnect 3524 User's Guide - Page 101
Configuring SNTP Settings, reload
View all Dell PowerConnect 3524 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 101 highlights
Resetting the Device 1 Open the Reset page. 2 Select a unit in the Reset Unit Number field. 3 Click Apply Changes. A confirmation message displays. 4 Click OK. The device is reset. After the device is reset, a prompt for a user name and password is displayed. 5 Enter a user name and password to reconnect to the Web Interface. Resetting the Device Using the CLI The following table summarizes the equivalent CLI commands for performing a reset of the device via the CLI: Table 6-8. Reset CLI Command CLI Command reload Description Reloads the device. The following is an example of the CLI command: console# reload You haven't saved your changes. Are you sure you want to continue? (Y/N)[N] Y This command will reset the whole system and disconnect your current session. Do you want to continue ? (Y/N)[N] Y Configuring SNTP Settings The switch supports the Simple Network Time Protocol (SNTP). SNTP assures accurate network switch clock time synchronization up to the millisecond. Time synchronization is performed by a network SNTP server. SNTP operates only as a client, and cannot provide time services to other systems. The switch can poll the following server types for the server time: • Unicast • Anycast • Broadcast Configuring System Information 101