Dell PowerConnect 3524 User's Guide - Page 240

Removing a Filter 1 Open the Notification Filter page. 2 Click Show All. The Filter Table opens. 3 Select a Filter Table entry. 4 Check the Remove checkbox. The filter entry is deleted, and the device is updated. Configuring Notification Filters Using CLI Commands The following table summarizes equivalent CLI commands for defining fields displayed in the Notification Filter page. Table 6-51. SNMP Notification Filter CLI Commands CLI Command Description snmp-server filter filter-name Creates or updates an SNMP notification filter. oid-tree {included | excluded} show snmp filters [filtername] Displays the configuration of SNMP notification filters The following is an example of CLI commands: Console (config)# snmp-server filter user1 iso included Console(config)# end Console # show snmp filters Name ----------user1 OID Tree iso Type -------Included Defining SNMP Notification Recipients The Notification Recipients page contains information for defining filters that determine whether traps are sent to specific users, and the trap type sent. SNMP notification filters provide the following services: • Identifying Management Trap Targets • Trap Filtering • Selecting Trap Generation Parameters • Providing Access Control Checks 240 Configuring System Information