Dell PowerConnect 3524 User's Guide - Page 197
Indicates the TACACS+ Server IP address., Key String 1-128 Characters
View all Dell PowerConnect 3524 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 197 highlights
The TACACS+ Settings page contains the following fields: • Host IP Address - Indicates the TACACS+ Server IP address. • Priority (0-65535) - Indicates the order in which the TACACS+ servers are used. The default is 0. • Source IP Address - The device source IP address used for the TACACS+ session between the device and the TACACS+ server. • Key String (1-128 Characters) - Defines the authentication and encryption key for TACACS+ communications between the device and the TACACS+ server. This key must match the encryption key used on the TACACS+ server. This key is encrypted. • Authentication Port (0-65535) - The port number through which the TACACS+ session occurs. The default is port 49. • Timeout for Reply (1-30) - The amount of time that passes before the connection between the device and the TACACS+ server times out. The field range is 1-30 seconds. • Status - The connection status between the device and the TACACS+ server. The possible field values are: - Connected - There is currently a connection between the device and the TACACS+ server. - Not Connected - There is not currently a connection between the device and the TACACS+ server. • Single Connection - Maintains a single open connection between the device and the TACACS+ server when selected • Use Default - Uses the default value for the parameter. The TACACS+ default parameters are user-defined defaults. The default settings are applied to newly defined TACACS+ servers. If default values are not defined, the system defaults are applied to the new TACACS+ servers. The following are the TACACS+ defaults: - Source IP Address - The default device source IP address used for the TACACS+ session between the device and the TACACS+ server. The default source IP address is 0.0.0.0. - Key String (1-128 Characters) - The default key string used for authenticating and encrypting all communications between the device and the TACACS+ server. This key is encrypted. - Timeout for Reply (1-30) - The default time that passes before the device and the TACACS+ server connection times out. The default is 5 seconds. Adding a TACACS+ Server 1 Open the TACACS+ Settings page. 2 Click Add. The Add TACACS+ Host page opens. Configuring System Information 197