Dell PowerConnect 3524 User's Guide - Page 233
snmp-server user, auth-md5, show snmp users, console config, John user-group, console, Group Name
View all Dell PowerConnect 3524 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 233 highlights
Deleting an User Security Model Table Entry 1 Open the SNMPv3 User Security Model (USM) page. 2 Click Show All. The User Security Model Table opens. 3 Select a User Security Model Table entry. 4 Check the Remove checkbox. 5 Click Apply Changes. The User Security Model Table entry is deleted, and the device is updated. Defining SNMPv3 Users Using CLI Commands The following table summarizes the equivalent CLI commands for defining fields displayed in the SNMPv3 User Security Model (USM) page. Table 6-49. SNMPv3 User CLI Commands CLI Command Description snmp-server user username groupname [remote engineid-string][auth-md5 password | auth-sha password | authmd5-key md5-des-key | auth-sha-key sha-des-key] Configures a new SNMP V3 user. show snmp users [username] Displays the configuration of users. The following is an example of the CLI commands: console (config)# snmp-server user John user-group auth-md5 1234 console (config)# end console# show snmp users Name Group Name Auth Method Remote ------- ------ John user-group md5 Configuring System Information 233