Dell PowerConnect 3524 User's Guide - Page 305
Enables Auto Negotiation on the LAG.
View all Dell PowerConnect 3524 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 305 highlights
• LAG Type - The port types that comprise the LAG. • Admin Status - Enables or disables the selected LAG. - Up - Traffic is enabled through the LAG. - Down - Traffic is disabled through the LAG. • Current Status - Indicates if the LAG is currently operating. • Admin Speed - The configured speed at which the LAG is operating. The possible field values are: - 10M - Indicates the LAG is currently operating at 10 Mbps. - 100M - Indicates the LAG is currently operating at 100 Mbps. - 1000M - Indicates the LAG is currently operating at 1000 Mbps. • Current Speed - The speed at which the LAG is currently operating. • Admin Auto Negotiation - Auto Negotiation is a protocol between two link partners that enables a LAG to advertise its transmission rate, duplex mode and flow control abilities to its partner. - Enable - Enables Auto Negotiation on the LAG. - Disable - Disables Auto Negotiation on the LAG. • Current Auto Negotiation - The current Auto Negotiation setting. • Admin Advertisement - Defines the auto-negotiation setting the LAG advertises. The possible field values are: - Max Capability - Indicates that all LAG speeds and Duplex mode settings are accepted. - 10 Full - Indicates that the LAG advertises for a 10 mbps speed LAG and full duplex mode setting. - 100 Full - Indicates that the LAG advertises for a 100 mbps speed LAG and full duplex mode setting. - 1000 Full - Indicates that the LAG advertises for a 1000 mbps speed LAG and full duplex mode setting. • Current Advertisement - The LAG advertises its speed to its neighbor LAG to start the negotiation process. The possible field values are those specified in the Admin Advertisement field. • Neighbor Advertisement - Indicates the neighboring LAG advertisement settings. The field values are identical to the Admin Advertisement field values. • Admin Flow Control - Indicates the flow control status on the LAG. Flow Control mode is effective on the ports operating in Full Duplex in the LAG. - Enable - Enables flow control on the LAG. - Disable - Disables flow control on the LAG. - Auto-negotiation - Enables the auto negotiation of flow control on the LAG. Configuring Switch Information 305