Dell PowerConnect 3524 User's Guide - Page 447
The Bandwidth Settings Table opens., Egress Shaping Rate on Selected Port
View all Dell PowerConnect 3524 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 447 highlights
• Interface - Indicates the port or LAG that is being displayed. • Egress Shaping Rate on Selected Port - Indicates the Egress traffic limit status for the interface. - Checked - The Egress traffic limit is enabled. - Not Checked - The Egress traffic limit is disabled. • Committed Information Rate (CIR) - Defines the Egress CIR traffic limit for the interface. • Ingress Rate Limit Status - Indicates the Ingress traffic limit status for the interface. - Checked - The Ingress traffic limit is enabled. - Not Checked - The Ingress traffic limit is disabled. • Ingress Rate Limit - Defines the Ingress traffic limit for the interface. Assigning bandwidth settings for an interface: 1 Open the Bandwidth Settings page. 2 Select an interface in the Interface field. 3 Define the fields. 4 Click Apply Changes. The bandwidth settings are assigned to the interface. Displaying the Bandwidth Settings Table: 1 Open the Bandwidth Settings page. 2 Click Show All. The Bandwidth Settings Table opens. Figure 9-4. Bandwidth Settings Table Configuring Quality of Service 447