Dell PowerConnect 3524 User's Guide - Page 204
RADIUS Settings, Show All, RADIUS Servers List, Remove, Apply Changes
View all Dell PowerConnect 3524 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 204 highlights
Removing a RADIUS Server 1 Open the RADIUS Settings page. 2 Click Show All. The RADIUS Servers List opens. 3 Select a RADIUS Servers List entry. 4 Select the Remove check box. 5 Click Apply Changes. The RADIUS server is removed, and the device is updated. Defining RADIUS Servers Using CLI Commands The following table summarizes the equivalent CLI commands for defining fields displayed on the RADIUS Settings page. Table 6-42. RADIUS Server CLI Commands CLI Command Description radius-server timeout timeout Sets the interval for which a device waits for a server host to reply. radius-server source-ip source Specifies the source IPv4 address that will be used for the IPv4 communication with RADIUS servers. radius-server source-ipv6 source Specifies the source IPv6 address that will be used for the IPv6 communication with RADIUS servers. radius-server retransmit retries Specifies the number of times the software searches the list of RADIUS server hosts. radius-server deadtime deadtime Configures unavailable servers to be skipped. radius-server key key-string Sets the authentication and encryption key for all RADIUS communications between the router and the RADIUS server. radius-server host ip-address [auth-port auth-port-number] [timeout timeout] [retransmit retries] [deadtime deadtime] [key key-string] [source source] [priority priority] Specifies a RADIUS server host. show radius-servers Displays the RADIUS server settings. 204 Configuring System Information