Dell PowerConnect 3524 User's Guide - Page 397
Enables or disables the IGMP Querier. The IGMP Querier simulates the, Specifies the VLAN ID.
View all Dell PowerConnect 3524 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 397 highlights
• VLAN ID - Specifies the VLAN ID. • IGMP Snooping Status - Enables or disables IGMP snooping on the VLAN. • Auto Learn - Enables or disables Auto Learn on the device. • IGMP Querier Status - Enables or disables the IGMP Querier. The IGMP Querier simulates the behavior of a multicast router, allowing snooping of the layer 2 multicast domain even though there is no multicast router. • Querier IP Address - IP address of the IGMP Querier. Use either use the VLAN's IP Interface address or define a unique IP address which will be used as a source address of Querier. • Host Timeout (1-2147483647) - Time before an IGMP snooping entry is aged out. The default time is 260 seconds. • Multicast Router Timeout (1-2147483647) - Time before aging out a Multicast router entry. The default value is 300 seconds. • Leave Timeout (0-2147483647) - Time, in seconds, after a port leave message is received before the entry is aged out. User-defined enables a user-definable timeout period, and Immediate Leave specifies an immediate timeout period. The default timeout is 10 seconds. Enabling IGMP Snooping on the Device 1 Open the IGMP Snooping page. 2 Select the VLAN ID for the device on which IGMP snooping needs to be enabled. 3 Select Enable in the IGMP Snooping Status field. 4 Complete the fields on the page. 5 Click Apply Changes. IGMP snooping is enabled on the device. Displaying the IGMP Snooping Table 1 Open the IGMP Snooping. 2 Click Show All. The IGMP Snooping Table opens. Figure 7-75. IGMP Snooping Table Configuring Switch Information 397